DJI RS 2 Pro Combo Setup for Smooth Gimbal Shots

Quick Answer

To get smooth gimbal shots with the DJI RS 2 Pro Combo, start by balancing each axis correctly, then calibrate the gimbal, and finish with a few practice moves using the included accessories.

Step-by-Step DJI RS 2 Pro Setup

1. Mount the camera and balance the tilt axis: Attach the camera plate to your camera, then slide it onto the tilt axis. Adjust the plate forward or backward until the camera stays level when you let go. Tighten the knob. Common mistake: leaving the camera tilted slightly, which makes the motor buzz. The camera should stay perfectly level without any motor force.
2. Balance the roll axis: Loosen the roll axis knob and slide the arm left or right until the camera stays horizontal. Tighten it. Check that the camera doesn't drift up or down. Common mistake: over-tightening before the axis is truly level, which hides the imbalance. The camera should hold its position when you tilt the gimbal side to side.
3. Balance the pan axis: Loosen the pan axis lock and rotate the arm so the camera points forward. Adjust the slide until the camera stays centered when you let go. Tighten the lock. Common mistake: forgetting to re-balance after adding the focus motor or phone holder. The gimbal should stay in place when you turn it left or right.
4. Power on and calibrate: Turn on the gimbal and open the Ronin app. Go to the calibration menu and run auto-calibration. Keep the gimbal still on a flat surface during the process. Common mistake: moving the gimbal during calibration, which leads to inaccurate motor strength. Calibration completes in under a minute and reduces drift.
5. Set up the RavenEye and focus motor: Attach the RavenEye to the gimbal's cold shoe and connect it via the app to get a live view. Mount the focus motor on the rod and gear it to your lens ring. Common mistake: not securing the gear firmly, causing focus slips during shots. Test the focus motor by rotating the dial and watching the lens ring move smoothly.
6. Practice basic moves: Start with slow, steady pans and tilts. Use the joystick for controlled movement, and try the sport mode for faster shots once you're comfortable. Common mistake: making abrupt starts and stops, which introduces shake even with a gimbal. Smooth footage comes from smooth inputs, not just the gimbal.

What Comes in the DJI RS 2 Pro Combo

• DJI RS 2 Pro Combo Gimbal Stabiliser RS2: The DJI RS 2 Pro Combo includes the Ronin RavenEye Image Transmission System, which provides 330′ 1080p video transmission with a latency of only 50ms, plus a focus motor, phone holder, and two focus gears. The RavenEye lets you view and frame your shot remotely on a phone or monitor, and the focus motor gives you precise manual focus control without touching the lens.